OtxHwLayer parameters
From GarantPlus Alvis Wiki
The list of E1/T1 Layer1 paramaters
The location of the config file
The /etc/rtpbridge/OtxHwLayer.conf is responsible for the E1/T1 configuration.
The list of supported parameters
T1E1LiMode <E1 / T1> / (NONE) ClockSource <N> (0) Termination <OTX_T1E1_TERM_120_OHM / OTX_T1E1_TERM_100_OHM / OTX_T1E1_TERM_75_OHM / OTX_T1E1_TERM_HIGHZ / OTX_T1E1_TERM_300_OHM>
ReceiveEqualizer <ON / OFF> AutoCrcBitInversion <ON / OFF> SetMonitorMode <ON / OFF> DisableTxPins <ON / OFF> FrontEndAmplifier <ON / OFF>
T1E1Loop <OTX_T1E1_LOOPS_OFF / OTX_T1E1_LINE_LOOP / OTX_T1E1_REMOTE_ON_LOOP_JITTER_ATTEN / OTX_T1E1_REMOTE_OFF_LOOP_JITTER_ATTEN / OTX_T1E1_LOCAL_LOOP> E1LineCode <OTX_E1_LC_AMI / OTX_E1_LC_HDB3> E1FrameFormat <OTX_E1_FF_DOUBLE_FRAME / OTX_E1_FF_CRC4_MULTIFRAME / OTX_E1_FF_CRC4_MULTIFRAME_G706 / OTX_E1_FF_UNFRAMED>
AisDetection <OTX_E1_AIS_ETS300233 / OTX_E1_AIS_G775> ExtendedHDB3errorDetect <ON / OFF> AutoRegainMultiframe <ON / OFF> RemoteAlarmFormat <OTX_T1_RA_YELLOW_A / OTX_T1_RA_YELLOW_B>
T1LineCode <OTX_T1_LC_AMI / OTX_T1_LC_B8ZS> T1FrameFormat <OTX_T1_FF_F12 / OTX_T1_FF_F4 / OTX_T1_FF_ESF / OTX_T1_FF_F72 / OTX_T1_FF_F12_J1 / OTX_T1_FF_F4_J1 /OTX_T1_FF_ESF_J1 / OTX_T1_FF_F72_J1 / OTX_T1_FF_UNFRAMED> CRC6 <ON / OFF>
LfaSensitivity <OTX_T1_LFA_2_OUT_OF_4 / OTX_T1_LFA_2_OUT_OF_5 / OTX_T1_LFA_2_OUT_OF_6> SignalingMode <OTX_T1_SM_CCS / OTX_T1_SM_CAS_CC / OTX_T1_SM_CAS_BR> AutoResync <ON / OFF> AutoRemoteAlarm <ON / OFF>
LineLength <N> (10) LosSensitivity <N> (21) LosRecovery <N> (10) HighTxPower <ON / OFF> (OFF) RxThreshold <N> (500) ConfigDynamicMode <ON / OFF> (OFF)
